Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
The appearance of the hanging chair was first designed according to the principle of the swing. The original swing was to find a rope and tie it to two trees and put a board underneath to complete the simple swing. In daily life, the use of hanging chairs varies from person to person. Usually, the hanging chair is installed on the balcony, which is convenient for people to use.
1. After purchasing the hanging chair, please check whether the various accessories are complete according to the manual before installation, to avoid a shortage of parts and cause inconvenience to the installation. Some commercially packaged springs will be placed in the bottom frame of the chair and should be checked carefully.
2. Then enter the formal installation. First, loosen the nuts on the chair chassis;
3. Then remove the tension spring hanging on the screw, be careful not to scratch your hands;
4. Then put the bracket into the chassis tube and insert the screw into the hole;
5. Firmly tighten the screws and nuts, remember to tighten them;
6. Put the hook into the top hole of the bracket;
7. Don't forget to hang the spring, the installation is almost complete;
8. Connect the sling chain and the extension spring, put them into the hanging basket, and the whole installation is completed.
